The 80A MPPT Solar Controller PC1800 can be used in 12v solar installations, solar installations 24v or 48v solar installations It has been manufactured to use grid photovoltaic panels in isolated solar installations . That is, it regulates the low voltage of the solar panels to be able to be used in a conventional solar installation. The function of the maximizer is to determine the maximum power point of the panel, to improve its performance and the production of electrical energy. This regulator has a capacity of 80 amps and allows a maximum open circuit panel voltage of 145V. In order to control the battery charge and extend its useful life, this regulator charges in four stages: normal, absorption, float and equalization. This also cleans the battery cells and improves their performance.
Installation Solar controller 80A MPPT 145v 12v / 24v / 48v PC1800
The installation of this regulator model is very simple, however in Wccsolar you we recommend that the Solar controller 80A MPPT 145v 12v / 24v / 48v PC1800 be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid breakage and failure due to improper installation.
Buy Solar Regulator 80A MPPT 145v 12v / 24v / 48v PC1800
Buy Solar Regulator 80A MPPT 145v 12v / 24v / 48v PC1800 is fast, safe and comfortable thanks to Wccsolar, plus the Solar controller 80A MPPT 145v 12v / 24v / 48v PC1800 It has an official guarantee from Wccsolar.
Contact us to receive more information.
80A MPPT 145v 12v / 24v / 48v PC1800 LCD Solar Controller
Data sheet
PV Open Circuit Voltage: 145VDC
From PV and MPPT field Voltage range:
12V = 16 VDC ~ 100 VDC
24V = 32 VDC ~ 130VDC
48 = 64 VDC ~ 130VDC
Max PV Input Power (12V): 1250W
Max PV Input Power (24V): 2500W
Max PV Input Power (36V): 3750W
Max PV Input Power (48V): 5000W
-BATTERY-
Voltage Absorption: 12.5 VDC / 25.0VDC / 37.5VDC / 50.0VDC
Refloat Voltage: 13.7VDC / 27.4VDC / 41.1VDC / 54.8VDC
Float Voltage: 14.3VDC / 28.6VDC / 42.9VDC / 57.2VDC
Low Voltage Protection point: 0VDC / 20VDC / 30VDC / 40VDC
Temperature coefficient Compensation: -3mv / ° C / cell (25 ° C VEF)
Size (mm): 359x149x217
Weight: 3Kg
Characteristic
- Data log: Last 128 days - Ah, Wh, W peak, Amps, PV voltage, float time, max and min battery voltage, absorption for each day plus accumulated Ah and kWh values
- Wind/hydraulic power: Consult manufacturer for compatible systems
- Positive ground systems: Requires bipolar switch to disconnect positive and negative conductors in the PV array and battery.
(The use of HUB4 and HUB10 in positive ground systems is not recommended) - Operating temperature range: -40ºC to +60ºC (The output power is derated from 40ºC)
- Environmental category: For indoor installation
The Differences of PWM and MPPT Regulators
What solar controller do I need according to the type of solar panel?
Normal regulator (PWM): Whether you have 12V solar panels to use in an isolated (or autonomous) 12V solar installation, or If you have 24V solar panels and 72 cells to use in a 24V installation, you must use a normal regulator (PWM type). Which is the most economical and suitable for this type of solar panel.
Maximizing Regulator (MPPT): If you have 24V solar panels and 60 cells (panels with a power greater than 200W), to be used in a 24V isolated solar installation, you must use an MPPT maximizing regulator. Necessary to amplify the voltage of these solar panels, so that when it reaches the batteries it is high and the energy is well stored. The MPPT regulator is more expensive but it is necessary with this type of plates. Which without the use of MPPT, the useful life of the batteries would be damaged since they could not be equalized and they would sulfate in a few months.
