The maximizer controller PC1600 can be used in 12v solar installations, 24v solar installations or 48v solar installations. It has been manufactured to use grid photovoltaic panels in isolated solar installations . That is, it regulates the low voltage of the solar panels to be used in a conventional solar installation. The function of the maximizer is to determine the maximum power point of the panel, to improve its performance and the production of electrical energy. This regulator has a capacity of 60 amps and allows a maximum open circuit panel voltage of 145V. In order to control the battery charge and extend its life, this regulator performs the charge in four stages: normal, absorption, flotation and equalization. Thanks to this, the battery cells are also cleaned and their operation is improved.
Installation Solar regulator 12v / 24v / 48v MPPT 60A / 145v CP1600
The installation of this regulator model is very simple, however in Wccsolar we recommend that the Solar Regulator 12v / 24v / 48v MPPT 60A / 145v CP1600 be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid breakage and breakdowns due to improper installation.
Buy Solar regulator 12v / 24v / 48v MPPT 60A / 145v CP1600
Buy Solar regulator 12v / 24v / 48v MPPT 60A / 145v CP1600 is fast, safe and comfortable thanks to Wccsolar, in addition the Solar Regulator 12v / 24v / 48v MPPT 60A / 145v CP1600 has an official Wccsolar warranty.
Contact us to receive more information.
Solar controller 60A MPPT 145v 12v / 24v / 48v CP1600
Data sheet
PV Open circuit voltage: 100 VDC @ 12V / 24V @ 145VDC / 145VDC @ 36V / 48V @ 145VDC
Field PV and MPPT Voltage range: 16 Vdc ~ 100 VDC / 32VDC ~ 130VDC / 48VDC ~ 130VDC / 64VDC ~ 130VDC
Max PV Input Power (12V): 800W
Max PV Input Power (24V): 1600W
Max PV Input Power (36V): 2400W
Max PV Input Power (48V): 3200W
-BATTERY-
Voltage Absorption: 12.5 VDC / 25.0VDC / 37.5VDC / 50.0VDC
Refloat Voltage: 13.7VDC / 27.4VDC / 41.1VDC / 54.8VDC
Float Voltage: 14.3VDC / 28.6VDC / 42.9VDC / 57.2VDC
Low Voltage Protection Point: 0VDC / 20VDC / 30VDC / 40VDC
Temperature coefficient Compensation: -3mv / ° C / cell (25 ° C VEF)
characteristics
Peak conversion efficiency: 98% (99% MPPT efficiency)
Max Charging current: 60 continuous amps @ 40 ° C ambient temperature
Emission Mode: Cooling Fan
LED indicator: systematic operation, LV indication, LV protection, over load protection, short circuit protection
LCD display: Charging voltage, charging current, storage battery voltage, battery storage capacity, output current
Alarm protections: photovoltaic short circuit, PV reverse polarity, battery reverse polarity, over charge protection, output short circuit protection, low voltage protection for storage battery
PV short circuit, reverse polarity PV
Reverse polarity battery, over charge protection
output short circuit protection
low voltage protection for storage battery
Mounting: wall mount
W * H * D (mm) / Net Weight (kg): 167.6 * 257.1 * 82.9mm / 3kg
The Differences of PWM and MPPT Regulators
What solar regulator do I need according to the type of solar panel?
Normal regulator (PWM): Whether you have 12V solar panels to use in a 12V (isolated or autonomous) solar installation, or if you have 24V solar panels and 72 cells to use in a 24V installation, you must use a normal regulator (of the PWM type). Which is the most economical and suitable for this type of solar panel.
Maximizer Regulator (MPPT): If you have 24V solar panels and 60 cells (power plates greater than 200W), for use in a 24V solar insulated installation, you must use an MPPT maximizer regulator. Necessary to amplify the voltage of these solar panels, so that when they reach the batteries it is high and the energy is stored well. The MPPT regulator is more expensive but is necessary with this type of plates. Which without the use of the MPPT, the battery life would be damaged since it could not be equalized and would be sulfated in a few months.
