The Belenus 2h.90M-10  solar pumping kit has been designed for irrigation or pumping from wells for heights of up to 90 meters and a water flow that will vary from 1,000 to 10,000 liters per hour depending on the height to which the water needs to reach. This pump will have a complete global operation of 8 hours in summer and 6 hours during the winter season. 
 
BELENUS Submersible Pump function following three ways:
-DC current solar panels
-Current Generator AC 
-Alternating Current 220VAC


 
Adaptable to any situation
Pump interior is designed the same as Grundfos to adapt to the vast majority of pumping conditions, whether it is one with a high flow rate or if, on the other hand, the unevenness is very high.
That is why we have products that go from 5 meters to 180 meters high and from 220l/h to 15,200l/h.
All this without sacrificing efficiency by making the most of the connected photovoltaic power.
 
Automatic tank fill control
We have simplified the tank filling control system thanks to our automatic controller. With it, the system will automatically control when to start or stop depending on the capacity of the tank.
In addition, it allows the connection of alternating current for the use of a generator to be able to start and stop completely automatically.
 
Dry well protection
There are two very important variables to control that the pump stops before the well dries up completely: The first is for the protection of the pump itself. The second to preserve the well. That is why at Acrosun we have developed the StopFlow system with which the pump automatically stops its operation.
In this way we managed to significantly extend the life of both parties.
 
Direct Current or Alternating Current with the same wires!
Only 3 wires to make this pump work, and one of them is the ground connection, and with them, we can feed the pump with both direct current and alternating current. Yes, it looks amazing. In this way we cover the need to maximize the options when making a solar pump work
 
Stainless steel body
Our product is made with the most resistant materials. The entire set is made of 304 Stainless Steel.
 
Wide voltage range
Between 60 and 380 volts is the operating range of our equipment, vital to make the most of the photovoltaic field.
 
Up to 43,200 liters/hour
We have equipment capable of giving a flow rate of up to 43,200 liters/hour. Something incredible considering the power in panels that it needs for it.
 
encapsulated electronics
The reason for the simplicity of the system at the time of its operation and installation resides in the pump itself. That is where its brain resides. An intelligent electronic system whose work is essential. All protected within the motor body itself.
 
FUNCTIONALITIES OFFERED BY THE UControl-250x CONTROLLER:
• Selection of the power input source. In AC mode, the power supply
Incoming can be the grid or generator connection.
• Selection of the power input source. In DC mode, the power supply
incoming can be solar panels or batteries. DC is the default power supply.
• Button to switch between automatic mode, AC mode, DC mode.
• Control on and off the pump.
• Protection against high voltages. The pump motor will shut down when AC range>265V.
• High voltage protection. The pump motor will shut down when the DC>480V.
• The pump stops running when the controller sensor detects that it is
full. Likewise, when the water level drops, the pump starts again.









Installation Plus Energy submersible solar pump
 
 En Wccsolar la instalación de este Bomba solar sumergible Plus Energy se recomienda que be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid bad connections and breakdowns due to incorrect installation.
 
Buy Plus Energy submersible solar pump
 
Buy la Plus Energy Submersible Solar Pump It is fast, safe and comfortable thanks to Wccsolar, plus the Plus Energy submersible solar pump has an official Wccsolar guarantee. 
 
Contact us for more information.
 
Technical Sheet Pump
Controller Technical Sheet