top of page

solar charge controllers

Solar chargers collect energy from your solar panels and store it in your batteries. Using the latest and fastest technology, BlueSolar maximizes this energy harvest, intelligently managing it to reach maximum charge in the shortest possible time. The BlueSolar takes care of the health of the battery, extending its useful life.


MPPT: Ultra-fast tracking of the Maximum Power Point

Thanks to the continuous monitoring of the output voltage and current of your solar (PV) panels, the MPPT technology (Ultra-fast Maximum Power Point Tracking) guarantees the collection and storage of every particle of energy available in your panels. The advantage of this process becomes more apparent when the sky is partly cloudy and the light intensity is constantly changing.


Remote monitoring and control

Remotely monitor and control the multitude of features of your BlueSolar MPPT charger by adding a Bluetooth dongle and syncing with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) Portal, you will also have access to the full power of your MPPT, anytime, anywhere; both services are free. In the case of remote installations, even when there is no internet connection or phone signal available, you can control your MPPT via Bluetooth by connecting it to a device LoRaWAN(long-range wide area network), optionally available .


load output

The intelligent Charge Output function prevents the damage that occurs when a battery goes "empty". You can configure the voltage at which the BlueSolar must disconnect the load, thus avoiding excessive draining of your batteries. And here's the neat trick: BlueSolar will try to recharge the battery to 100% every day. If it cannot do so, such as during periods of bad weather, it will raise the disconnect voltage daily until it succeeds. We call this feature BatteryLife, because it maintains the health of your battery and extends its life.

BlueSolar MPPT 150/35 regulator

SKU: regblue150/35
  • BlueSolar MPPT 150/35

    Data sheet

    • Battery Voltage (Auto Selection): Automatic Selection 12 / 24 / 36 / 48 V (a software tool is needed to select 36 V)
    • Rated charging current: 35A
    • Rated PV power, 12V 1a,b): 12V: 500W /24V: 1000W /36V: 1500W /48V: 2000W
    • Maximum PV short circuit current
      2): 40A
    • open circuit voltage
      PV: 150 V absolute maximum in the coldest conditions 145 V starting and running at maximum
    • Maximum efficiency: 98%
    • Self-consumption: 12V: 20 mA 24V: 15 mA 48V: 10mA
    • "Absorption" charge voltage: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
    • "Float" charge voltage: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
    • Charge Algorithm: Multi-Stage Variable
    • Protection:  PV reverse polarity Output short circuit Overtemperature
    • Temperature compensation: -16 mV / °C, -32 mV / °C resp.
    • Working temperature:  From -30 to +60 °C (full rated power up to 40°C)
    • Humidity: 95%, non-condensing
    • Data communication port: VE.Direct 


    • Colour: Blue (RAL 5012)
    • Connection terminals: 16 mm² / AWG6
    • Protection degree: IP43 (electronic components), IP22 (connection area)
    • Weight: 1.5Kg
    • Dimensions (H x W x D): 130 x 186 x 70 mm


    • Safety: EN/IEC 62109-1, UL 1741, CSA C22.2
  • The Differences of PWM and MPPT Regulators

    What solar regulator do I need according to the type of solar panel?

    Normal regulator (PWM): Whether you have 12V solar panels to use in a 12V isolated (or autonomous) solar installation, such as if you have 24V solar panels and 72 cells for use in a 24V installation, you must use a normal regulator (PWM type). Which is the most economical and suitable for this type of solar panel.

    Maximizing Controller (MPPT): If you have 24V solar panels and 60 cells (power panels greater than 200W), to use in an isolated 24V solar installation, you must use an MPPT maximizer regulator. Necessary to amplify the voltage of these solar panels, so that when it reaches the batteries it is high and the energy is stored well. The MPPT regulator is more expensive but it is necessary with this type of boards. Which without the use of the MPPT, the useful life of the batteries would be damaged since it could not be equalized and would sulphate in a few months. 

In WccSolar we are Multibrand Distributors of Solar Energy Supplies.


WccSolar is First Distributor of several brands of Solar Inverters, We also have an associated technical service to respond quickly to any problem or incident that could be caused by your Inverter devices.


This technical service will be active both during the warranty period and outside this period. In which this service will be offered to the client so that any problem can be solved. Offering peace of mind to the customer in the purchase of our devices.

Secure payment

Customer Service and Telephone Sales

854 556 349

Technical service

954 089 500

Send us your Queries

install wccsolar solar kit
free solar energy


Monday to Friday

From 10:00 to 19:00

shipping to europe wccsolar

Shipments to Spain in 24h
In Europe

3-6 day

All our products for Renewable Energies comply with the most demanding regulations.

All our products for Renewable Energies comply with the most demanding regulations.

bottom of page