This three-phase self-consumption kit to the zero discharge network allows you to generate and consume electricity during daylight hours. The zero discharge network self-consumption kit allows you to save on the electricity bill, achieving considerable annual savings. Solar panels and zero discharge network self-consumption kit is the best option to start with renewable energy.
Presentations with VIDEO HERE
 
This Kit is the solution to generate great savings, consisting of solar panels and a self-consumption inverter for zero discharge grid injection.
 
This Kit gives us approximately 10Kw/hour of energy for savings, calculating a day in winter about 4 hours gives us 40,000w/day of savings and in summer about 7 hours 70,000w/day of savings.
 
The GridFree inverter with limiter is a revolutionary solution for home solar installations that works in a similar way to other GridFree microinverters, but they are capable of reducing their own production according to the current consumption of the house and thus completely avoiding overflows to the public network. .
 
Zero discharge network self-consumption kit installation
 
At Wccsolar, the installation of this self-consumption kit to the zero discharge network is recommended to be installed by a photovoltaic professional, or else the installation instructions are strictly followed to avoid bad connections and breakdowns due to incorrect installation.
 
This Solar Kit is compatible with the following structures:
Perforating Roof StructuresThey are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.
Roof Sandwich Plate Structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the deck or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Structures Flat or little inclinationDesigned to be able to anchor the solar panels to the ground, either on a flat roof on top of a building or on the ground, we have several inclination angles to be able to adapt all the structures to the needs that arise in each case.
 
Characteristics of the SUN-10Kw Three-phase 380v Self-consumption Inverter

Self-consumption inverter SUN-10Kw Red 10Kw has 2 MPPT trackers, which means that we can have 2 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN-10Kw Red 10Kw self-consumption inverter has an extremely low starting range for its internal regulator. The working range of its regulator is between 220V and 850V, so with 8 panels of 72 cells it will already be possible to start up. It has a high limit in its working voltage, so we can use any type of panel as long as we respect the ranges that the manufacturer defines for us.
 
This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN-10Kw Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.
This inverter is compatible with the single-phase Chint wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical data sheet in each case.
The SUN-10Kw Red 10Kw Self-consumption inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even being a grid connection inverter.
 
Component Description:
Download Manual
 
Contact Usto receive more information.