3000W charger inverter 24V, with MPPT 80A special for kits photovoltaic solar, is a pure sine wave inverter has 30A battery charger and MPPT solar controller of 80A integrated in a single equipment. It is one of the best solutions on the market today, as it is capable of managing the charging of the solar panels , the charging of the batteries , and it also has a battery charger, which allows charging them from a generator set to gasoline or with the electrical network in the event that the solar panels were not capable of supplying the necessary energy. The function of Solar hybrid inverters is not to pass current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
These are pure wave inverters and some of the models are also parallelizable, supporting higher powers than other inverters.
The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
Thanks Function for Equalization (parameter 36) increases 20% more of the useful life of batteries.
The investor is able to generate a pure sinusoidal wave, with the same characteristics as those created by the conventional electrical network.
All this can be view through the LCD display. which is included in the housing of the Must Solar Inverter. In addition, the equipment from the manufacturer Must Solar allows the programming of the operating parameters of the installation, as well as the inverter wifi connection to be able to monitor it from any computer through a web page.
Operating scheme:
In the case of being at night, a cloudy day or having a demand for energy greater than what the panels can provide, the necessary energy is provided by the battery bank. If, for example, at 12:00 noon we are producing 1,500W with solar panels, and the house consumes 500W at that time, we will be charging the batteries with the remaining 1,000W, in order to have supply during the night.
3KVA VHM 24v hybrid inverter installation
In order to provide maximum protection for both the inverter and the system in general, we advise you to install a Protection Kit and pre-installation . The installation of this model of Inverter 3Kva 24v hybrid it is simple with your pre-installation kit, however in Wccsolar you We recommend that the 3Kva 24v hybrid inverter be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid bad connections and breakdowns due to incorrect installation.
Buy 3KVA VHM 24v hybrid inverter
Buy the 3Kva 24v hybrid inverter is fast, safe and comfortable thanks to Wccsolar, in addition the 3Kva 24v hybrid inverter It has an official guarantee from Wccsolar.
Contact us to receive more information.
2 years warranty
Hybrid inverter 3KW 24v MPPT 80A/145V VHM
Data sheet
- Model: 3KVA VHM
- Rated power: 3000W.
- Input voltage: 24V.
- Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for household appliances).
- Frequency range: 50Hz/60Hz (automatic detection).
- Output voltage regulation (battery mode): 230 VAC +-5%
- Maximum power (starting peaks): 6000W.
- Efficiency: 93%.
- Transfer time: 10 ms (for computers) 20 ms (for electrical appliances).
- Wave type: Pure sine wave.- Maximum voltage of the photovoltaic panel open circuit 145VDC
- Battery voltage: 24V.
- Float charging voltage: 27V.
- Overload protection: 31V.- VP Rated power: 2000W.
- Regulator charge current: 80A.MPPT
- Charger charging current: 30A.
- Power consumption in stand-by: 2W.- Measurements: 131 x 272 x 372mm
- 2 years warranty
- Weight: 11 KgCharacteristic
The WccSolar 3000VA 24V inverter charger includes - among other things - a 24V battery charger with a 30A capacity, which is powered by a 230V alternating current power source. The solar charge regulator that it incorporates is 80A with MPPT technology, and a nominal photovoltaic power capacity of 2000W, which means that the power of the photovoltaic solar field should not exceed 2000W total. Thanks to the existing possibility of being able to introduce a gasoline generator or the electrical network, it allows the batteries to be charged through this source in addition to feeding the house by bypassing it, in this way, there will be no time when the installation is left without Energy.
The WccSolar 3000VA 24V inverter charger, with 80A MPPT regulator is fully programmable and configurable through its information screen, with the possibility of connecting an external generator it will ensure that you will never be without electricity.
The speed of interconnection between the network, the solar panels or the batteries is so fast that absolutely nothing is perceived; You will always have a fluid power supply without interruptions.
The LCD screen has a resolution of 255 x 160 pixels with backlight making it easy to read. The energy generation data, alerts and other information are shown to the user in a clear and simple way.
The 3000VA 24V WccSolar Inverter Charger is an all-in-one system that does not need any other device.
The 3000VA 24V WccSolar Inverter Charger always prefers energy from the sun or batteries and as a last resort it will use energy from the electricity grid or the generator set, so you will be independent from your electricity company.
Inverter Easy to install
There is no other system as easy to install as the 3000VA 24V WccSolar Inverter Charger series. This is not only good for the person doing the installation, you will also save time, space and money.
Configuration of the 3000VA 24V Wcc Solar MPPT80A charger inverter
Remote control and programming software included (WATCHPOWER) and inverter-computer USB cable. WatchPower includes monitoring application and inverter configuration application. Allows control and monitoring of various devices via the AN, Internet or USB. Warning or alarm notifications via audible alarm, pop-up screen, broadcast, SMS, inbox message and email.
