EasySolar 12V 1600VA 70-16 MPPT 100/50 inverter 
 All-in-one solar power solution 
 The EasySolar 12V 1600VA 70-16 MPPT 100/50 charger inverter combines an MPPT 100V and 50Amper solar charge controller, a charger inverter and an AC distributor in one device. The EasySolar is easily installed, with a minimum of wiring. 
 All-in-one solar power solution 
 The EasySolar combines an MPPT solar charge controller, an inverter / charger and an AC distributor into a single device. The product is easily installed, with a minimum of wiring. 
 
 The solar charge controller: Blue Solar MPPT 100V 50Amp 
 Up to three chains of PV panels can be connected to three series of MC4 PV connectors (PVST01). 
 
 The inverter / charger: MultiPlus Compact 12/1600/70 
 The MPPT charge controller and MultiPlus Compact inverter / charger share the DC battery cables (included). The batteries can be charged with solar energy (BlueSolar MPPT) and / or with AC electricity (inverter / charger) from the grid or from a generator. 
 
 Features Inverter Charger Regulator Victron Energy Easy Solar 1600Va 12V with MPPT Regulator 100V 50A 
 The inverter part has a power of 1600VA with connection to 12V batteries. The wave generated by the inverter is pure sine wave, which allows the correct functioning of all the equipment in a house such as televisions, lights, washing machines, etc. The inverter emits 230V pure sinewave current single phase through a coil of copper, which guarantees a longer duration of the device, since the way to emit the current is mechanical, which minimizes electrical component failures. 
 
 The part of the battery charger is a 12V charger capable of supplying the batteries with a maximum current of 70A per hour of operation. Through the battery charger, we can charge the batteries through a source of energy external to the solar installation, very useful when there are days of rain and cloudiness, where the solar panels are not able to supply the energy requested by the house or by the consumer. Through the input of the battery charger, the Easy Solar 1600VA 12V is capable of charging the batteries through a gasoline or diesel generator or from the mains. 
 
 The part of the charge controller , incorporates an MPPT regulator of 100V maximum voltage and 50A maximum current, thus allowing to have up to 700W of solar panels, so we will make the most of it with 4 panels of 200W, which are currently the most powerful in the 12V range. We can also install 24V panels, although the inverter is at 12V, the MPPT charge controller will lower the voltage from 24V to 12V. If we put 24V solar panels there is no problem if we go over power, but the regulator will limit to 700W. 
 
 The function of the victron Easy Solar 1600Va 12V is to combine an MPPT charge controller with a charger inverter and an alternating current distributor only in one device. Said inverter is installed very easily since all the pre-installed connections have the lower part of it to be able to arrive with MC4 terminals from the panels and exit with a single cable in alternating current. 
 The victron Easy Solar 1600Va 12V has three connections in that box for the input of the solar panels, that is, we can connect up to three panel chains in our photovoltaic system as long as we will not exceed the 100V maximum voltage of the panel field that the regulator allows us. 
 
 Contact us to receive more information. 
 
 Victron Easy Solar 1600VA manual