The Sheet Metal Cover Structure 05V Solar Panels is a type of support to be able to place the solar panels on a sheet metal roof with the correct inclination and orientation. The Solar Panels Sheet Metal Covered Structure does not offer the panels additional inclination, but a simple fastening. Indicated for a maximum lower distance of 30cm.
The Solar Panels Sheet Metal Cover Structure is designed to support solar panels located vertically on a simple sheet metal roof with a distance between ribs of less than 30cm. This structure model is suitable for any type of solar panel.
The Solar Panels Sheet Metal Cover Structure is designed to be installed with the same inclination as the existing roof, distributing the panels vertically. The row of panels must be installed perpendicular to the drop of the roof, since the panel must be held with the clamps on its longest side.
You will receive your Solar Panels Sheet Metal Cover Structure together with a detailed assembly drawing so that you can install the structure easily and without complications.
The Solar Panels Sheet Metal Cover Structure is designed to be used with modules of 60, 72 and 144 cells and also for those with a special width. You have the possibility of installing panels of any dimension, respecting that the profiles are suitable for sheet metal roofs with a maximum distance of less than 30 cm. Its clamps, which are included, admit different types of profile thickness, between 30 and 50mm.
The anchoring of the Solar Panel Sheet Metal Cover Structure is indicated for sheet metal or sandwich panel roofs. It includes a sealing gasket for when the sheet metal is drilled and also the anchoring screws to the roof.
The great advantage of the Solar Panels Sheet Metal Cover Structure is its simplicity of installation since it is not necessary to remove anything from the existing cover.
The materials of the Solar Panels Sheet Metal Covered Structure are made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.
The EN AW 6005A T6 alloy is a high-strength aluminum alloy, for this reason, as well as for its ability to be anodized, it is used to make structural profiles. All the present structures can be offered in anodized aluminum, whose advantage over raw aluminum structures is the greater resistance to corrosion.
quick assembly
Thanks to the supply of all the components of the prefabricated system, as well as the innovative “click” assembly, the assembly time is greatly reduced.
Maximum Versatility
The height-adjustable intermediate and end clips, as well as the roof hooks, allow great flexibility in the assembly of any type of module or roof covering.
Optimum adaptability
Thanks to the use of telescopic parts, a millimeter sizing of the installation can be carried out. The laborious task of cutting the mounting rails is no longer necessary.
Long useful life
All system components are made of high-quality A2 aluminum or stainless steel, ensuring high resistance to corrosion.
Maximum security
The fixing system is verifiable with the solar sizing calculation program according to the static loads of the different roofs and complies with the requirements of DIN 1055.
Structure Cover Plate 05V
The structure is made up of:
1-Trapeze 30CM
4-Stainless steel screws 85*8mm
4-Insulation rubber de 3M
KIT 1 PANEL
4-Trapeze 30CM
16-Stainless steel screws 85*8mm
16-Insulation rubber de 3M
4- End flanges
2 PANEL KIT
6-Trapeze 30CM
24-Stainless steel screws 85*8mm
24-Insulation rubber de 3M
4- End flanges
2- Intermediate flanges
3 PANEL KIT
8-Trapeze 30CM
32-Stainless steel screws 85*8mm
32-Insulation rubber de 3M
4- End flanges
4- Intermediate flanges
4 PANEL KIT
10-Trapeze 30CM
40-Stainless steel screws 85*8mm
40-Insulation rubber de 3M
4- End flanges
6- Intermediate flanges
5 PANEL KIT
12-Trapeze 30CM
48-Stainless steel screws 85*8mm
48-Insulation rubber de 3M
4- End flanges
8-Intermediate flanges
6 PANEL KIT
14-Trapezine 30CM
56-Stainless steel screws 85*8mm
56-Insulation rubber de 3M
4- End flanges
10-Intermediate flanges
7 PANEL KIT
16-Trapeze 30CM
64-Stainless steel screws 85*8mm
64-Insulation rubber de 3M
4- End flanges
12- Intermediate flanges
8 PANEL KIT
18-Trapeze 30CM
72-Stainless steel screws 85*8mm
72-Insulation rubber de 3M
4- End flanges
14- Intermediate flanges
9 PANEL KIT
20-Trapeze 30CM
80-Stainless steel screws 85*8mm
80-Insulation rubber de 3M
4- End flanges
16- Intermediate flanges