Pressure pump SHURFLO 8090-802-278 230v for water transfer and pressure increase in intermittent work
Diaphragm pumps that are used to transfer and increase pressure are all self-aspirating. and can work for a long time are equipped with an internal bypass to prevent hydraulic overloads. SHURflo pumps, due to their high technological value, reliability, durability and a variety of available construction materials, are used in many applications where size, chemical resistance or ease of maintenance and revision are important requirements.
8000 SERIES
- Pressures up to 150 psi (10.3 bar)
- Self-priming up to 8 vertical feet (2.4 m)
- chemical resistant materials
- Designed for heavy duty spraying and fluid transfer applications
- It can run dry without damage
- Built in check valve
The 8000 series diaphragm pump is the most widely used SHURFLO industrial pump. With spherically shaped valves and the automatic demand switch, these pumps provide consistent reliable operation, operation and priming. Up to 1.8 GPM (6.8 l / min)
Model Number: 8090-802-278 230v
- PUMP DESIGN: Positive Displacement 3 diaphragm pump chamber
- RETENTION VALVE: (. 2-way Op) prevents reverse flow and 6 feet. Head forward flow
- CAM: 2.5 Degree
- MOTOR: Permanent magnet, P / N 11-160-10, with thermal protection
- VOLTAGE: 230 VAC nominal
- PRESSURE: adjustable closing (range 80-100 PSI) Factory setting @ 100 PSI, turn 85 PSI 5 PSI
- The temperature of the liquid: 180 degrees Fahrenheit (82 degrees Celsius) Max.
- PRIME: self-priming up to 7.0 Ft. Vertical, Max. 30 psi (2.1 bar) pressure tap
- PORTS: 3/8 "-18 NPT female
CONSTRUCTION MATERIAL:
- PLASTICS- Nylon
- Viton VALVES
- by Santoprene diaphragm
- FASTENERS- Galvanized steel
- Net weight: 4.8 pounds (2.18 kg)
- WORK CYCLE: Intermittent (See Rise Temperature Graph)
- Typical applications: Ground Machinery
Voltage: 230 VAC
- PSI: 20 40 60 100
- BAR: 1.4 2.8 4.1 6.9
- GPM: 1.25 1.09 0.94 0.28
- L / min: 4.7 4.1 3.6 1.1
- Amps: 0.25 0.30 0.36 0.50