Pure zero wave grid injection inverter with limiter with 2000W output power works with input voltage 60V to 110Vdc. The limiter can reduce the output power based on the actual consumption of the house. function MPPT provides maximum possible efficiency of solar panels.
This inverter with limiter is a revolutionary solution for domestic solar installations, which works in a similar way to other microinverters but are able to reduce its own production according to the current consumption of the house and therefore completely avoid overflows to the public network. 
These inverters are designed for internal use and the current values can be monitored on a color screen where the following values are displayed:
The current output power of solar panels/battery
Energy supplied by the public grid
DC input voltage
Temperature
Grid voltage
Date and Time
Daily production graph
Inverter configuration
 
There are also specific inverter settings suitable in the case when the battery is in the DC input IE. Working input voltage (lower limit) and the maximum output power of the inverter.
GridFree inverter operates in the input voltage range of 60-110VDC and continuous power is 2000w. The output of the inverter is at rated voltage 230VAC and output is connected between the main circuit breaker to the electricity meter box and house circuit breakers. 
Inverter transfer energy from solar panels or batteries to the home electrical grid. Your appliances will have energy from their own production. The idle energy is taken from public grid in case the output power of Your own output will not be sufficient for all appliances. You can protect your system from unwanted overflows into the public grid when you are going to produce more power than the appliances require by installing the supplied current sensor. This sensor Connect directly to the inverter and make sure the sensor is connected to the tight side in the sensor case.
The Grid Connection Inverter is an inverter that allows us to interconnect with the electrical grid without the need for batteries, which is why this type of installation is economical and very profitable in the long term, given its low cost from a simple installation and with few electronic devices that make the system more expensive.
For a grid connection installation to work correctly, we will need a group of solar panels, previously calculated to adapt to the needs of each case, and a grid connection inverter, which will allow us to transform energy from the sources into alternating current. solar panels in order to make use of it
The inverters have a zero grid injection system, this means that in the event that the solar installation is producing more energy than the home or industrial warehouse is consuming, the zero injection system will allow us to reduce the power at will. power of the inverter only in the event that there is an energy surplus.
In summary, the functionality of zero injection systems is to reduce the power of the inverter when the energy produced is greater than the energy consumed, thus preventing it from being discharged into the general electrical grid.
 
2000w Inverter Installation Zero discharge grid injection
 The installation of this 2000w Inverter model Zero discharge grid injection is simple, however at Wccsolar we recommend that be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
 
Buy Inverter 2000w Zero discharge grid injection
 
Buy the Inverter 2000w Zero discharge grid injectionIt is fast, safe and comfortable thanks to Wccsolar, plus the 2000w Inverter Zero Discharge Grid Injection It has an official guarantee from Wccsolar. 
 
Contact us to receive more information.
 
 
ESP Manual
LIMITESP Manual
WFI Manual