Injection Investor to RED
How Investor to RED works:
With a field of solar panels from 1000w to 80000w and inverter to RED, the collected energy is converted and injected directly into the electrical network of your home. Simply connect the RED Inverter to any socket in your home and you will see your electricity consumption reduced, you will notice how your electric meter is stopped when RED Inverter is in action.
Our ZERO injection inverter already has a SMART METER function (for zero discharge) Built into an inverter you only have to activate by parameters.
Most homes have that consumption permanently in their homes, the refrigerator, connected electronic devices, computers, etc., even when we are not in it, it consumes on average 1000w / h up to 80000w, which are contributed directly from the sun during the day. If you have good consumption habits, you will see how your electric bill is reduced to a large extent.
Información de Productos
Videos de Productos
Cómo son los Inversores de Conexión a Red
Los inversores solares de conexión a red son dispositivos básicos en instalaciones de energía renovable, ya que su función reside en cambiar el voltaje de entrada de corriente continua a un voltaje simétrico de salida de corriente alterna, con la magnitud y frecuencia deseada por el usuario o diseñador. Es decir, es lo que nos va a hacer posible convertir la energía que adquirimos del sol, agua, aire etc. en energía eléctrica adecuada para nuestros fines. Su clasificación general se realiza en dos tipos: inversores monofásicos e inversores trifásicos.
How are the Network Connection Investors
Solar grid inverters are basic devices in renewable energy installations, since their function is to change the input voltage of direct current to a symmetrical voltage of output of alternating current, with the magnitude and frequency desired by the user or designer. That is, it is what will make it possible for us to convert the energy we acquire from the sun, water, air, etc. in adequate electrical energy for our purposes. Its general classification is carried out in two types: single-phase and three-phase inverters.
With this network connection system we do not have elements such as batteries, which allow us to store energy to consume it when it suits us, but must be consumed instantly: it only operates from sunrise to sunset. That is why among the most prominent and profitable uses of this type of grid connection inverters is the energy supply of large areas, such as solar farms of considerable size. In this category single phase inverter and three phase inverter.
Information about Network Connection Investors
A basic network connection system consists of solar panels and a solar network connection inverter. Photovoltaic modules obtain energy from the sun and convert it into DC energy. The network connection inverter converts the DC energy of the photovoltaic modules into AC energy that can be sold to the public network. A network connection system is an effective way to obtain economic benefits, to increase the production of renewable energies and to improve the environment.
In the WccSolar online store, we divide the inverters by criteria such as power (12V, 24V, 48V ...) or the type of wave. This section is dedicated to grid connection inverters. This type of photovoltaic network connection inverter is the only one that we can use if we have a self-consumption system (also called a network connection). Usually, they have a minimum voltage to which they can work and to get the system to that voltage we must connect in series as many solar panels as necessary until it is reached (the voltages of the panels range between 20V and 50V).
With this network connection system we do not have elements such as batteries, which allow us to store energy to consume it when it suits us, but must be consumed instantly: it only operates from sunrise to sunset. That is why among the most prominent and profitable uses of this type of grid connection inverters is the energy supply of large areas, such as solar farms of considerable size. In this category single phase inverter and three phase inverter. To learn more about Network Connection Investors.
What is a dumping equipment 0?
An anti-power device is a device that constantly monitors the energy consumed by the home to avoid injecting excess energy from the panels to the grid. The pouring device 0 makes a reading of the energy consumed at each moment of the dwelling, and communicates it through a data cable to the connection inverter, which will be in charge of modifying the work point of the panel to produce only the that is consumed, and thus avoid the injection of surpluses to the network. That is, complying with Spanish regulations, the discharge devices 0 avoid pouring into the network the energy produced by the photovoltaic panels and not consumed.
Depending on the grid connection inverter, a 0 or other discharge device will be compatible, for example, with a PlusEnergy network inverter it is compatible with the PlusEnergy Sun-1000w-2000w, as well as with the PlusEnergy Sun-3kw at 6kw or well with the PlusEnergy Sun- 8kw at 80kw and depending on the needs of the installation one model or another will be convenient.
From WccSolar we are at your disposal to advise you on which zero injection system is recommended for your case, contact us without obligation.
In WccSolar we are Multibrand Distributors of Solar Energy Supplies.
WccSolar is First Distributor of several brands of Solar Inverters, We also have an associated technical service to respond quickly to any problem or incident that could be caused by your Inverter devices.
This technical service will be active both during the warranty period and outside this period. In which this service will be offered to the client so that any problem can be solved. Offering peace of mind to the customer in the purchase of our devices.