Introducing the PlusEnergy REVO-E II 3000w 24v mppt 90 hybrid inverter, it is ainverter Works as OFF Grid and On Grid (RED or Isolated injection) with input of solar panels up to500 volts . The new hybrid inverter model allows it to operate with and without batteries. Only by connecting the solar panels to the hybrid inverter we will have a 230v output to be able to carry out self-consumption installations, power pumps or function as a pure wave inverter in isolated installations. The power factor is 1 so the device delivers a real 3000w and is parallelizable up to 9 devices.
• Works without batteries.
• Self-consumption and power supply to the grid With or without batteries.
• Programmable supply priority for Solar Panel, Battery or Grid
• User adjustable charging current and voltage
• Multiple programmable operating modes: on-grid, off-grid, and on-grid with backup
• Monitoring software for real-time status visualization and control
REVO-E Setup Video
3000W 24V inverter charger, with 90A MPPT special for photovoltaic solar kits, it is a pure sine wave inverter with a 60A battery charger and 90A MPPT solar regulator with a DC 500V input integrated into it. a single team. It is one of the best solutions on the market today, since it is capable of managing the charging of the solar panels, the charging of the batteries, and also has a battery charger, which allows charging them from a group gasoline generator or with the electrical grid in the event that the solar panels were not capable of supplying the necessary energy. The function of hybrid Solar inverters is not to pass current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
These are pure wave inverters and some of the models are also parallelizable, supporting higher powers than other inverters.
The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
The inverter is capable of generating a pure sine wave, with the same characteristics as that created by the conventional electrical grid.
All this can be doneview using the LCD display. which is included in the Voltronic Solar Inverter housing. In addition, the equipment from the manufacturer Voltronic Solar allows the programming of the operating parameters of the installation, as well as the connection via Wifi to be able to monitor it from any computer through a web page.
Operating diagram:
If it is at night, on a cloudy day, or if there is a demand for energy greater than what the panels can provide, the necessary energy is provided by the battery bank. If, for example, at 12:00 noon we are producing 1,500W with the solar panels, and the home consumes 500W at that time, we will be charging the batteries with the remaining 1,000W, in order to have supply during the night.
Installation of 3KW REVO-24V hybrid inverter
To provide maximum protection for both the inverter and the system in general, we advise you to install a Protection and Pre-Installation Kit. The installation of this model of 3KW 24v hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 3KW 24v hybrid inverter be used with your pre-installation kit.be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
Buy 3KW REVO-E 500V hybrid inverter
Buy the 3KW 24v hybrid inverterIt is fast, safe and comfortable thanks to Wccsolar, plus the 3KW 24v hybrid inverter It has an official guarantee from Wccsolar.
Contact us to receive more information.
6 month warranty.
REFURBISHED Hybrid inverter 3KW 24v MPPT 90A/500V REVO
Data sheet
- Model:3KW REVO-E 500V
- Rated power: 3000W.
- Input voltage: 24V.
- Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for home appliances).
- Frequency range: 50Hz/60Hz (automatic detection).
- Output voltage regulation (battery mode): 230 VAC +-5%
- Maximum power (starting peaks): 6000W.
- Efficiency: 93.5%.
- Transfer time: 10 ms (for computers) 20 ms (for home appliances).
- Wave type: Pure sine wave.- Maximum voltage of the photovoltaic panel open circuit 500VDC
- Battery voltage: 24V.
- Float charging voltage: 27V.
- Overload protection: 30V.- PV Nominal power: 2500W.
- Regulator charging current: 90A MPPT.
- Charger charging current: 60A.
- Stand-by power consumption: 10W.- Measurements: 141 x 295 x 528mm
- Weight: 11 Kg.Characteristics
3kw 24v MPPT Hybrid Inverter concentrates three powerful devices in a single unit. In this way, the operation of the entire solar installation can be regulated and controlled from a single screen.
This 24V MPPT 3Kw model includes:
- A 3000W 24V pure sine wave inverter:
Pure wave inverter of 3000W nominal power with maximum power for several seconds of 6000W, to cover high starting peaks of some appliances with a motor. This inverter can be used for all types of electrical devices as long as the nominal use power of 3000W is not exceeded. It is recommended for the operation of a refrigerator, freezer, television, washing machine, coffee maker, grill, microwave, dishwasher, lighting, small appliances such as blender, juicer, coffee maker, fan, computer, printer, audio or DVD player, drill, etc.
The Omega screen allows you to view the real power of the devices that are connected to the solar installation. This screen also indicates the percentage of use of the inverter according to the demand to which it is made to work at any given time.
- A 90A MPPT maximizing regulator:
Each unit includes a large MPPT charge regulator that allows up to 80 amps in 24V panel capacity. Whether they are isolated panels: with a power between 150 to 330W, or network (MPPT): panels with a power equal to or greater than 250W. The regulator is the default screen of the 5kw 48v MPPT Hybrid Inverter and allows you to control the battery charge level at all times.
The regulator can be configured according to the type of battery installed: acid (solar monoblock or stationary) or agm/gel. This way the charge is precise and the useful life of the battery is extended. It also allows you to configure the three charging stages: raw charge, absorption and float.
- A 60A battery charger:
The battery charger allows you to power the solar installation with external support energy through the use of a generator or generating set. This charger can be configured to allow power to pass through once the batteries drop to a marked discharge level. In this way, with the use of an automatic generator (or grid energy), it will automatically start up, becoming a completely autonomous solar installation.
This advanced charger uses multiple stages to quickly recharge batteries. Thanks to these recharges, the battery never drops below a certain charge level, which prolongs its life cycle.
The use of a charger is ideal to cover high consumption peaks in facilities where there are specific days with consumption much higher than usual. In this way, consumption is covered and it is avoided having to oversize the solar installation for this reason.
Other notable features:
- Offers configuration of charging priority according to its origin (solar / electric company or generator), as well as priority of the origin of the output power (solar / electric company / solar-battery-electric company).
- The charger has a wide voltage range as well as a filter to regulate the wave oscillations of older generators. Thus it can be used to connect all types of generating sets as well as the electrical network itself.-Automatic restart while the AC is recovering.
- Protection against overload and short circuit.
- Intelligent battery charger design to optimize battery performance.
- Cold start function.
