The Solar Pumping Controller 2.2kW 400V Aspire It is a device that will allow you to use your water pump either 400V three-phase up to 3CV powering it directly from solar panels. This system pays for itself quickly since you will no longer need any generator that uses fuel or mains electricity to power the water pump. During sunny hours, the panels will supply power to the controller and it will be responsible for moving the water pump directly without the need for batteries, inverters or any additional device. Depending on the power of the pump, it will be necessary to install a greater or lesser number of solar panels so that their power is sufficient to power the system appropriately. This model can be complemented since includes an AC input to power the pump with generator or mains electricity when there is not enough sun.
Solar Pumping Controller 2.2kW 450VVacuum
Technical description of the Aspire 2.2kW 450V Solar Pumping Controller
This Aspire brand solar pump controllerIt can be used for three-phase pumps of up to 2.2kW or, in other words, 3CV of power.It is perfect for operating any type of water pump, whether pool, submersible or surface pumps, and includes an LCD display to view and configure all the parameters of the water pump. For correct operation, you must review the manual for start-up since the particularities of each pump have to be entered in the initial configuration of the pump controller.
Highlights of the Aspire 2.2kW 450V Solar Pumping Controller
Among the greatest advantages of Solar Pumping Controller 2.2kW 450V Aspire we can find:
- Economy and reliability of operation. Forget about expensive maintenance on generators and expensive direct current pumps or those with integrated drives. Use a conventional three-phase pump and this pump controller with solar panels will do the job.
- Integrated Solar Maximizer (MPPT). Which guarantees efficient and optimal energy production, with a performance of more than 97%.
- Wide input voltage range for the series of panels, which will allow us a simple start-up and reducing wiring and connections to the maximum. We always advise multiplying the pump power by 1.5 to know the amount of solar power that is recommended to be installed.
- Compatibility with pumps between 0.75 and 3CV three-phase power. You simply have to configure it detailing the characteristics of the pump manufacturer.
- Integrated protections that cover all possible aspects: Phase loss, dry pumping, motor blocking, low solar radiation, voltage out of range, excess intensity or temperature and short circuit.
- Compatibility with 3 level switches to detect appropriate water level in the well in addition to the minimum and maximum in the destination tank. In this way the pumping operation can be fully automatic.
Typical use applications of the Aspire 2.2kW 450V Solar Pump Controller
The Solar Pump Controller 2.2kW 450V AspireIt has an excellent market in agriculture, being able to supply water to crops through irrigation or extraction pumps, very useful when the field has various heights and we can do without generators or electrical grid.
In mining, to be able to provide water supply without the need to use generators, the rapid payback of the solar pumping system is assured. Furthermore, it is not necessary to replace the pump, we only power it with the solar panels.
In farms and livestock, reducing operating expenses thanks to an infinite and green energy source.
Contact us to receive more information.
