This HUAWEI Self-consumption Kit provides us with approximately 20Kw/hour of energy for savings, calculating a day in winter about 4 hours gives us 80KW/day of savings and in summer about 7 hours 140KW/day of savings .
Technical Sheet 12KTL-20KTL M2
Manuals Huawei 12 KTL-20KTL M2
Installation guide HuaWei inverter a HUAWEI 12KTL - 20KTL M inverters2
This Solar Kit is compatible with the following structures:
Perforating Roof StructuresThey are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.
Roof Sandwich Plate Structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the deck or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Structures Flat or little inclinationDesigned to be able to anchor the solar panels to the ground, either on a flat roof on top of a building or on the ground, we have several inclination angles to be able to adapt all the structures to the needs that arise in each case.
Characteristics of the SUN2000L-20KTL Self-consumption Inverter
The SUN2000L-20KTL Self-consumption inverter has 2 MPPT trackers, which means that we can have 2 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN2000L-20KTL Self-consumption inverter has an extremely low starting range for its internal regulator. The working range of your regulator is between 140 and 980V, so with 5 panels of 72 cells you can start up. It has a high limit in its working voltage, so we can use any type of panel as long as we respect the ranges defined by the manufacturer.
This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN2000L-20KTL Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.
This inverter is compatible with the Chint Triphasica wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical data sheet in each case.
The Self-consumption SUN2000L-20KTL 20000W inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even being a grid connection inverter.
Component Description:
- Detailed information about the inverters HERE
Contact us to receive more information.
HuaWei solar kit 20kwh Self-consumption Grid injection Three-phase
This kit includes:
- 44 Solar panel 450w 144cell Perc(19.8KW hora/ 99KW dia)(If you want other types of panels, please contact us)
- 1 Three-phase Huawei inverter SUN2000-20KTL-M2 20kW
- 1Huawei Smart Meter three-phase
- 6 Fuse y porfafusbile 10X38 1000Vdc
- 3 Direct Current Surge Protector
- 100 meters of Cable 6mm (50m. Red and 50m Black) with MC4 connectors
Data Sheet 20kw inverter Huawei
-
EFFICIENCY:
- Maximum efficiency 98.65%
- Weighted European efficiency 98.30%
-
ENTRANCE
- Recommended maximum DC input 29,760 Wp
- Maximum input voltage 1 1.080 V
- Operating voltage range 2 160 V ~ 950 V
- Starting voltage 200 V
- MPPT Max Power Voltage Range 480 Vdc～850 Vdc
- Rated input voltage 600 V
- Maximum input current per MPPT 22 A
-
EXIT
- Connection to electrical network Three phases
- Active Rated AC Power 20,000 W
- Max AC apparent power 22,000 VA
- Nominal Output Voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W + N + PE
- Rated AC mains frequency 50 Hz / 60 Hz
- Max output current 33.5 A
- Adjustable power factor 0.8 capacitive ... 0.8 inductive
- Max total harmonic distortion ≤ 3%
-
FEATURES AND PROTECTIONS
- Input Side Disconnect Device Yes
- Anti-islanding protection Yes
- AC overcurrent protection Yes
- AC short circuit protection Yes
- AC surge protection Yes
- DC reverse polarity protection Yes
- Protection against atmospheric discharges DC 3 Yes
- Protection against atmospheric discharges AC 3 Yes
- Residual current monitoring Yes
- Arc fault protection Yes
- Ripple Receiver Control Yes
-
GENERAL DATA
- Operating temperature range -25 ~ +60 °C (Derating above 45 °C @ Rated output power)
- Relative Operating Humidity 0% RH ~ 100% RH
- Operating altitude 0 - 4,000 m (decrease in electrical capacity from 2,000 m)
- Ventilation Natural convection
- LED Display Indicators
- RS485 communication; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
- 4G/3G/2G via Smart Dongle-4G (Optional)
- Weight (including mounting bracket) 25 kg
- Dimensions (including mounting bracket) 525 x 470 x 262 mm
- IP65 degree of protection
- Consumption at night during energy < 1 W
-
STANDARDS COMPLIANCE (MORE OPTIONS AVAILABLE UPON REQUEST)
- Safety EN/IEC 62109-1, EN/IEC 62109-2
- Standards for connection to the electrical network G98, G99, EN 50438, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777, C10/11, ABNT,
- UTE C15-712, RD 1699, RD 661, PO 12.3, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWA 2.0
- Maximum short circuit current 30 A
- Quantity of MPP 2 Trackers
- Maximum number of inputs per MPPT 2
-
Huawei Solar FusionSolar APP
We inform you that la FusionSolar APP from Huawei Solar is not available on Google Play (Android).
From now on, to be able to monitor and perform Huawei configurations through la APP FusionSolar you must download the application from Huawei's AppGallery.
AppGallery (Android) is the platform for acquiring Huawei mobile applications. Through the link you have to download apk file of the application for installation.
We leave you download option:
links: _cc781905-5cde- 3194-bb3b-136bad5cf58d_ Click here to download
