This battery combiner kit is for adding a second or third battery system to your car, boat, RV, or any other vehicle. It uses the simplest and most advanced technology to keep all your batteries charged using the engine's electrical system, but isolates the starter battery when charging ceases so you're never stranded.
Manual cyrix-ct battery combiner
Kit to add a second or third battery system in your car, boat, RV or whatever you want. It uses the simplest and most advanced technology.
to keep all your batteries charged using the engine's electrical system, but isolates the starter battery when charging ceases so it never
get strandedThe Cyrix-ct 12/24-120 is a voltage sensitive bi-directional relay. So it will also be activated if, for example, the extra battery is being charged.
by a battery charger.
Smart battery monitoring prevents cycling. Cyrix software does more than just connect and disconnect based on battery
voltage and with a fixed time delay. The Cyrix watches the general trend (increasing or decreasing voltage) and reverses a previous action only if
the trend has been reversed for a certain period of time. The delay time depends on the voltage deviation from the trend.
Parallel emergency function. If required, an emergency start push button can be wired to the "start assist" connection (85). The relay will activate
for 30 seconds after the 'jump assist' has momentarily connected to the battery plus. Alternatively, a paralleling switch can be used to
activate the relay while the switch remains closed.
Easy to install. There is no need to cut any factory wiring that could void your boat or vehicle manufacturer's warranty.
Cyrix-ct Battery Combiner Kit
kit include:
Cables and terminals included.
- Cable 6mtr RED 10mm²
- 0.5mtr BLACK 10mm² cable
- Assembly of BLACK cable of 0.2 mtr of 1.5 mm² with M8 terminal and quick terminal of 6.3 mm
- 2 M8 cable lugs with insulating sleeve
- 4 M6 cable lugs with insulating sleeve
- 4 ties for 150 mm cables