The new hybrid inverter model 5KW VM II 48v 500Vdc allows it to work with and without batteries. Only by connecting the solar panels to the inverter we will have a 230v output to be able to carry out self-consumption installations, power pumps or function as a pure wave inverter in isolated installations.
- Pure Sine Wave Solar Inverter
- Output power factor 1
- High voltage range at PV input
- The Inverter can operate without a battery bank
- Built-in 80A MPPT Solar Charger
- Battery bank equalization function to optimize performance and extend cycle life
- Maximum power of solar panels 5000w
- Wifi Plus function
All of this can be viewed using the LCD display, which is included in the Voltronic Power Inverter housing. In addition, the equipment from the manufacturer Voltronic Power allows the programming of the installation's operating parameters, as well as connection via WiFi to be able to monitor it from any computer through a web page.
With the VM2 and VM3 series hybrid inverters it is advisable to use an AC stabilizer for use with a generating set.
Operating diagram:
If it is at night, on a cloudy day, or if there is a demand for energy greater than what the panels can provide, the necessary energy is provided by the battery bank. If, for example, at 12:00 noon we are producing 1,500W with the solar panels, and the home consumes 500W at that time, we will be charging the batteries with the remaining 1,000W, in order to have supply during the night.
Installation of 5KW VM II 48v hybrid inverter
To provide maximum protection for both the inverter and the system in general, we recommend installing a Protection and Pre-Installation Kit. The installation of this model of 5KW 48v hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 5KW VM II 48v hybrid inverter be installed by a photovoltaic professional, or strictly followed the installation instructions to avoid bad connections and breakdowns due to incorrect installation.
Buy 5KW VM II 48v hybrid inverter
Buying the 5KW VM II 48v hybrid inverter is fast, safe and comfortable thanks to Wccsolar, and the 5KW VM II 48v hybrid inverter has an official Wccsolar warranty.
REFURBISHED HYBRID INVERTER 3KW 24v Mppt 80A/500V VM
DATA SHEET
Model:5KW VM II 48v
- Rated power: 5000W.
- Input voltage: 48V.
- Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for home appliances).
- Frequency range: 50Hz/60Hz (automatic detection).
- Output voltage regulation (battery mode): 230 VAC +-5%
- Maximum power (starting peaks): 10000W.
- Efficiency: 90%.
- Transfer time: 10 ms (for computers) 20 ms (for home appliances).
- Wave type: Pure sine wave.- Maximum voltage of the photovoltaic panel open circuit 500VDC
- Battery voltage: 48V.
- Float charging voltage: 54V.
- Overload protection: 63V.
- MPPT regulator charging current: 80A.
- Charger charging current: 60A.
- Stand-by power consumption: 10W.- Measurements: 100 x 300 x 440 mm
- Weight: 12Kg.CHARACTERISTICS
Savings on the WccSolar 5000VA 48V Inverter Charger
The 5000VA 48V charger inverter includes - among other things - a 48V volt 80A solar battery charge controller and a 230VAC charger. If the consumption of the house is higher than the energy produced by the batteries alone, it will use all the energy solar and will take the missing electricity from the electrical grid.
The 5000VA 48V charger inverter is fully programmable, the possibility of connecting an external generator ensures that you will never be without electricity.
The speed of connecting between the grid, solar panels or batteries is so fast that absolutely nothing is perceived; You will always have a fluid supply of electrical energy without interruptions.
The LCD screen has a resolution of 255 x 160 pixels with backlighting making it easy to read. Energy generation data, alerts and other information are displayed to the user in a clear and simple way.
The 5000VA 48V WccSolar Charger inverter is an all-in-one system that does not need any additional devices.
The 5000VA 48V WccSolar Charger inverter always prefers energy from the sun or batteries and as a last resort it will use energy from the electrical grid or the generator set, so you will be independent of your electricity company.
Inverter Easy to install
There is no other system as easy to install as the 5000VA 48V WccSolar Inverter Charger series. This is not only good for the person doing the installation: you will also save time, space and money.
Inverter configuration
Remote control and programming software included (WATCHPOWER) and inverter-computer USB cable. WatchPower includes monitoring application and inverter configuration application. Allows control and monitoring of various devices via AN, Internet or USB. Warning or alarm notifications via audible alarm, pop-up screen, broadcast, SMS, inbox message and email. Download the latest version from the web:
PRECAUTIONS
With the VM2 and VM3 series hybrid inverters it is advisable to use an AC stabilizer for use with a generating set.
