Pressure Pump 12V Shurflo  2088-313-145 Automatic with Pressure Switch
 
Thepressure pump de Shurflo 2088-313-145It maintains a 12V DC operation and is capable of pumping 13.6 liters per minute, supplying a maximum pressure of 3.4 bars.
 
It has a 2-year guarantee and is very common in the use ofagricultural spraying with phytosanitarydue to its valveviton, as well as in small houses that want to have water pressure in the tap or to turn on heaters, whether gas or electric.
 
This type of pump is for continuous use, socan be used without interruption timethat is needed
 
The water supply and discharge intakes are built in a 1/2" diameter male thread, it incorporates a pressure switch in the head of the pump in which we can regulate the stop and start point of the pressure switch, to the extent that we tighten the central screw the pump will cut off the flow of water at a lower pressure.
 
This water pump can be used for pumping or spraying water with phytosanitary products for agricultural use,as well as clean water.
 
It has 20 centimeters de cable in positive and negative pole, to facilitate the connection to the 12V source, be it a battery or a power supply.
 
The 12V booster group is suitable  forrun on solar energywith a 24/7 pump controller.
 
It is aShurflo pump self-primingup to 2.44m which, given its technology, allows it to reach 3.4 bars of pressure at its outlet. To reach said pressure, about 121.20 W will be necessary; the control of the 12V Shurflo pressure pump performs the control of its own operation through the adjustable pressure switch.
 
The pump we introduce Shurflo 2088-313-145 12V, can be applicable tosmall houses or caravansthat with it, they can supply water with pressure; If this is the case, it is highly recommended to use a water tank or accumulator, commonly called a boiler, thus avoiding having to force the Shurflo 12V pressure group to start continuously.
 
Applications:
 
Filling of small tanks other water bases
Agricultural spraying with phytosanitary products (Recommended to clean the pump after use)
Possibility of supplying pressurized water pumping in isolated areas
Supply of pressurized water pumping in caravans or camping

Technical characteristics:
 
Working voltage: 12V
Adjustable pressure switch: from 2.1 to 3.4 Bar
Maximum consumption: 121.20 W
Maximum water temperature: 77ºC
Maximum self-priming height: 2.44 meters
Type of operation: Continuous
Typical Applications: Agricultural Spraying or Clean Water Pumping
Maximum flow: 13.6 liters/minute
Flow at 2.1 Bar: 9.4 liters/minute
Flow at maximum pressure (3.4 Bar): 7.2 liters/minute
Mechanical Characteristics
Weight: 3.1kg
Pump Plastics: Polypropylene
Valve: Viton
Diaphragm: Santoprene
Inlet and outlet connection: 1/2" male thread
Wire: 20cm red and black wire (positive and negative)

It is recommended that it be installed in its natural position, that is, horizontally. It is also recommended that a non-return valve be installed in the pump suction. We recommend cleaning the pump with clean water after use with corrosive liquids such as phytosanitary products.