This week our installers have traveled to this farm, in the surroundings of Seville, to carry out the assembly of this solar kit. This has been sized for weekend use, according to the needs of our client.
Although solar energy is a clean and sustainable alternative for areas isolated from the electricity grid or with difficult connections, this time the installation was motivated by our client's desire to save on their electricity rates.
The solar panels used are 330W polycrystalline, one of the most powerful in the 24v range for use in 12v/24v/48v solar installations. Thanks to 5 buses each cell to produce maximum solar efficiency.
To ensure that all the energy produced by these panels is used, 4 GEL 12V and 250 AH batteries were installed. It is a sealed monoblock battery so it can be installed in indoor places with poor ventilation or in sensitive environments such as power supply for hospital devices, for example. To list a series of characteristics we could say the following:
- The compact size of the 12V PlusEnergy TPG250 GEL Battery makes it easy to transport and handle.
- Even if it is overturned, it will not spill acid, but it is recommended that it not be overturned during transport or handling, or of course, during operation.
- It has a very considerable durability. With discharges below 30% we can exceed 3000 life cycles. On the other hand, if the downloads are around 50%, the life cycles will be over 1200.
- Greater resistance to vibrations. It gives very good results as a service battery in caravans or campers.
This installation also has a 5KW 48V hybrid solar inverter with an 80A MPPT regulator and a 60A charger. It is one of the best options offered by the market, capable of managing the charge of the panels and the batteries. As it has a charger function, it allows you to charge the batteries through network support when the production of the panels is not enough.
In addition, this hybrid inverter model allows parallel function for the most demanding installations. That is, it is valid for 220V single-phase and 380V three-phase with 3 inverters, connected in parallel, increasing up to 15,000W continuous and 30,000w starting peak.
This solar kit also includes the rest of the material necessary for the correct operation of the installation (solar panel structure, fuses, wiring, circuit breaker, etc.)
It is recommended that the kit be installed by a photovoltaic professional, since it consists of devices that require special handling and knowledge for optimal system configuration.
If you are thinking of buying a grid-injection solar kit like this one or any other, contact us at WCCSOLAR and we will give you a tailored quote without obligation based on the needs of your home and consumption.
