Phoenix 48V 5000VA inverter with SinusMax with superior design 
 Developed for professional use, the Phoenix 48V 5000VA inverter is ideal for countless applications. The criteria used in its design was to produce a true sinusoidal inverter with optimized efficiency but without compromising its performance. By using high frequency hybrid technology, we obtain as a result a product of the highest quality, of compact dimensions, lightweight and capable of supplying power, without problems, to any load. 
 Additional starting power 
 One of the unique characteristics of SinusMax technology is its very high starting power. Conventional high frequency technology does not offer such extraordinary performance. Phoenix inverters, however, are well equipped to power difficult loads, such as refrigerators, compressors, electric motors and similar devices. 

 Virtually unlimited power thanks to parallel and three-phase operation. Up to 6 units of the inverter can operate in parallel to achieve greater output power. Six units 24/5000, for example, will provide 24 kW / 30 kVA of output power. Its configuration is also possible for three-phase operation. 

 Load transfer to another AC source: the automatic transfer switch. If an automatic transfer switch is required, we recommend using the MultiPlus inverter / charger instead. The switch is included in this product and the MultiPlus charger function can be disabled. Computers and other electronic equipment will continue to operate without interruption, since the MultiPlus has a very short switching time (less than 20 milliseconds). Computer interface 

 All models have an RS-485 port. All you need to connect to your PC is our MK2 interface (see section "Accessories"). This interface is responsible for galvanic isolation between the inverter and the computer, and converts the RS-485 into RS-232. It is also available an RS-232 to USB conversion cable, together with our VEConfigure software, which can be downloaded for free from our website www.victronenergy.com, all inverter parameters can be customized, including voltage and output frequency, Overvoltage or undervoltage settings and relay programming This relay can, for example, be used to signal several different alarm conditions, or to start a generator.Inverters can also be connected to VENet, the new power control network of Victron Energy, or other computer monitoring and control systems. 
 New applications for high power inverters 
 The possibilities offered by high power inverters connected in parallel are really amazing. For ideas, examples and calculations of battery capacity, please see our book "Electricity on board", available for free at Victron Energy and downloadable from the Victron website. 
 Parallel and three-phase operation Yes 
 
 You can download the manual HERE