We present the hybrid inverter PlusEnergy REVO-E II 5500w 48v mppt 90 is an inverter It works as OFF Grid and On Grid (RED or Isolated injection) with input from solar panels up to 500 volts . The new hybrid inverter model allows operation with and without batteries. Only by connecting the solar panels to the hybrid inverter will we already have a 230v output to be able to carry out self-consumption installations, power pumps or function as a pure wave inverter in isolated installations. The power factor is 1 so the equipment delivers real 5500w and is parallelizable up to 9 equipment.
• Works without batteries.
• Self-consumption and power to the network With batteries or without batteries.
• Programmable supply priority for solar panel, battery or network
• User adjustable charging current and voltage
• Multiple programmable modes of operation: network connection, off-network and network connection with backup
• Monitoring software for visualization and control of status in real time
• Parallel operation of up to 9 units.
5500W 48V inverter charger, with 90A MPPT special for photovoltaic solar kits , it is a pure sine wave inverter with a 60A battery charger and a 90A MPPT solar regulator with a DC 500V input integrated in a single unit. It is one of the best solutions on the market today, as it is capable of managing the charging of the solar panels , the charging of the batteries , and also has a battery charger, which allows charging them from a generator set to gasoline or with the electricity grid in case the solar panels were not able to supply the necessary energy. The function of hybrid Solar inverters is not to run the current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the production surplus that we do not use, which is the power figure that we see on the screen.
Grace Function of Parallel Inverters Chargers allow the most demanding installations to have a maximum of 9 inverters connected in parallel increase up to 49KW continuous and peak of arrache 98KW (valid for single phase 220v and three phase 380v)
They are pure wave inverters and some of the models are also parallel, supporting higher powers than other inverters.
The battery is charged during the day with the production surplus that we do not use, which is the power figure that we see on the screen.
The inverter is capable of generating a pure sine wave, with the same characteristics as that created by the conventional electrical grid.
All of this can be viewed through the LCD display. that is included in the Must Solar Inverter housing. In addition, the equipment of the manufacturer Must Solar allows the programming of the operating parameters of the installation, as well as the connection via Wifi to be able to monitor it from any computer through a web page.
Operation diagram:
In the case of being at night, a cloudy day or having an energy demand higher than what the panels can provide, the necessary energy is provided by the battery bank. If for example at 12:00 noon we are producing 1,500W with solar panels, and the house consumes 500W at that time, we will be charging the batteries with the remaining 1,000W, in order to be able to have supply during the night.
Installation 5.5KW REVO-48V hybrid inverter
In order to provide maximum protection for both the inverter and the system in general, we advise you to put a Protection and Pre-installation Kit . The installation of this model of 5.5KW 48v hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 5.5KW 48v hybrid inverter be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid bad connections and breakdowns due to improper installation.
Buy inverter 5.5KW REVO-E 500V hybrid
Buying the 5.5KW 48v hybrid inverter is fast, safe and convenient thanks to Wccsolar, in addition to the 5.5KW 48v hybrid inverter It has an official guarantee from Wccsolar.
Contact us to receive more information.
2 years warranty
Solar Inverter 5.5KW 48v Hybrid MPPT Regulator 90A/450V Charger
Data sheet
- Model: 5.5KW REVO-E 450V
-Rated power: 5500W.
- Input voltage: 48V.
- Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for household appliances).
- Frequency range: 50Hz/60Hz (automatic detection).
- Output voltage regulation (battery mode): 230 VAC +-5%
- Maximum power (starting peaks): 11,000W.
- Efficiency: 93%.
- Transfer time: 10 ms (for computers) 20 ms (for household appliances).
- Wave type: Pure sine wave.- Maximum voltage of the photovoltaic panel open circuit 450VDC
- Battery voltage: 48V.
- Floating charging voltage: 54V.
- Overload protection: 60V.- PV Nominal power: 4500W.
- Regulator charging current: 90A MPPT.
- Charger charging current: 60A.
- Power consumption in stand-by: 10W.- Measurements: 141 x 295 x 528mm
- Weight: 12.5 kg.Characteristics
Hybrid Inverter 5.5kw 48v MPPT concentrates three powerful devices in a single unit. In this way, the operation of the entire solar installation can be regulated and controlled from a single screen.
This 48V 5.5Kw MPPT model includes:
- A 5500W 48V pure sine wave inverter:
Pure wave inverter with a nominal power of 5500W with maximum power for several seconds of 11000W, to cover high starting peaks of some devices with motor. This inverter can be used for all kinds of electrical devices as long as the nominal power of use of 5500W is not exceeded. It is recommended for the operation of a refrigerator, freezer, television, washing machine, coffee maker, grill, microwave, dishwasher, lighting, small appliances such as blender, juicer, coffee maker, fan, computer, printer, audio or DVD player, drill, etc.
The Omega screen allows you to view the real power of the devices that are connected to the solar installation. This screen also indicates the percentage of use of the inverter according to the requirement to which it is made to work at all times.
- A 90A MPPT maximizing regulator:
Each unit includes a large MPPT charge regulator that allows up to 80 amps of 24V panel capacity. Whether they are isolated panels: power between 150 to 330W, or network (MPPT): panels with a power equal to or greater than 250W. The regulator is the default screen of the 5kw 48v MPPT Hybrid Inverter and allows the battery charge level to be controlled at all times.
The regulator can be configured according to the type of battery installed: acid (solar monoblock or stationary) or agm / gel. In this way the charge is precise and the useful life of the battery is extended. It also allows you to configure the three charging stages: bulk charge, absorption and float.
- A 60A battery charger:
The battery charger allows the solar installation to be supplied with external support energy through the use of a generator or generator set. This charger can be configured to allow energy to pass through once the batteries drop to a marked discharge level. In this way, with the use of an automatic generator (or energy from the grid), it will automatically start up, becoming a totally autonomous solar installation.
This advanced charger uses multiple stages to quickly recharge the batteries. Thanks to these recharges, the battery never drops below a certain charge level, thus extending its life cycle.
The use of a charger is ideal to cover high consumption peaks in facilities where there are specific days with much higher consumption than usual. In this way consumption is covered and avoiding having to oversize the solar installation for this reason.
Other outstanding features:
- Offers priority configuration of charging according to its origin (solar / electric company or generator), as well as priority of the origin of the output power (solar / electric company / solar-battery-electric company).
- The charger has a wide voltage range as well as a filter to regulate the wave oscillations of older generators. Thus, it can be used both to connect all types of generators and the electrical network itself. -Automatic restart while the AC is recovering.
- Protection against overload and short circuit.
- Smart battery charger design to optimize battery performance.
- The cold start function.
